1 distinct campaigns affect this selection. Announcement dates below are different from vehicle model years. A campaign may cover multiple years.
26V216000 · Power Train:Driveline:Universal Joint
Reported: 2026-04-03 (April 3, 2026) · Model years: 2018
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2018 E 400 4MATIC Sedan, E 400 4MATIC Wagon, E 400 4MATIC Cabriolet, E 400 4MATIC Coupe, 2018-2020 Maybach S 560 4MATIC, S 560 4MATIC Coupe, S 450 4MATIC, 2019-2020 E 450 4MATIC Sedan, E 450 4MATIC Wagon, E 450 4MATIC Coupe, and E 450 4MATIC Cabriolet vehicles. The drive shaft universal joint may break, resulting in a sudden loss of drive power.
Consequence: A sudden loss of drive power increases the risk of a crash.
Remedy: Dealers will inspect and replace the drive shaft as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed May 22, 2026. Additional letters will be sent once the remedy is available. Owners may contact MBUSA customer service at 1-800-367-6372. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning April 10, 2026.
Inspect model-year patterns, reported mileage, monthly activity and the evidence behind each signal.
Data completeness
2 unique complaints in this selection. Analysis snapshot: 2026-10-01.
50.0%Usable mileage1 / 2 records
100.0%Valid incident date2 / 2 records
100.0%Valid filing date2 / 2 records
100.0%Ordered incident and filing dates2 / 2 records
Missing, zero and invalid mileage is excluded. Dates after the snapshot are excluded. Examples are limited selections, not a representative sample.
Problems by model year
Model-wide comparison of the eight most reported components across the model. Cells show counts and shares within each model year. Open a cell for source examples.
Component complaint heatmap
Component
2018
Engine
150.0%ODI 11760041
Component/System: The intake camshaft positioner/adjuster on cylinder bank 2 of the M276 V6 engine has failed, along with associated timing components. The vehicle (2018 Mercedes-Benz E400, VIN [XXX]) remains unrepaired and is available for inspection upon request. Safety Risk: The engine produces a loud metallic rattle on cold starts, indicating loss of proper camshaft timing control. If unaddressed, camshaft timing deviation can progress to timing chain failure, which on interference engines can cause valve-to-piston contact and sudden, seve…
The contact owns a 2018 Mercedes-Benz E400 4MATIC. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed and the driveshaft felt loose, with an abnormally loud knocking sound coming from the vehicle. The contact associated the failure with NHTSA Campaign Number: 26V216000 (Power Train). The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was contacted and informed the contact that the remedy was not yet available. The failure mileage was approximately 84,000…
Darker cells indicate a larger share of submitted complaints. Components overlap. This measures complaint composition, not failure probability.
Failure mileage by component
Median and middle 50% of usable owner-reported mileages. Ranges require at least five records.
Component failure mileage distribution
Component
Mileage range (25th–75th percentile)
Median
Usable records
Examples
Power Train
Too few reports for a range
84,000 mi
1 (sparse)
ODI 11753715 · 84,000 mi
The contact owns a 2018 Mercedes-Benz E400 4MATIC. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed and the driveshaft felt loose, with an abnormally loud knocking sound coming from the vehicle. The contact associated the failure with NHTSA Campaign Number: 26V216000 (Power Train). The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was contacted and informed the contact that the remedy was not yet available. The failure mileage was approximately 84,000…
Explore monthly filing activity alongside recall announcements. Up to ten years of monthly history is available.
Solid line: filed complaints. Dashed amber lines: recall announcement dates for this vehicle selection; markers include all recall components. The latest month is partial. Temporal proximity does not establish causation.
Monthly counts, recall campaigns and complaint examples
The contact owns a 2018 Mercedes-Benz E400 4MATIC. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed and the driveshaft felt loose, with an abnormally loud knocking sound coming from the vehicle. The contact associated the failure with NHTSA Campaign Number: 26V216000 (Power Train). The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was contacted and informed the contact that the remedy was not yet available. The failure mileage was approximately 84,000…
Component/System: The intake camshaft positioner/adjuster on cylinder bank 2 of the M276 V6 engine has failed, along with associated timing components. The vehicle (2018 Mercedes-Benz E400, VIN [XXX]) remains unrepaired and is available for inspection upon request. Safety Risk: The engine produces a loud metallic rattle on cold starts, indicating loss of proper camshaft timing control. If unaddressed, camshaft timing deviation can progress to timing chain failure, which on interference engines can cause valve-to-piston contact and sudden, seve…
Complete months in the latest six months with at least 10 complaints, at least twice the preceding 12-month average, and at least three square-root deviations above that average.
This is a descriptive screening rule, not a statistical defect finding. Publicity and reporting changes can increase submissions.
No complete months meet the spike thresholds for this selection.
Equal-age model-year comparison
Model-wide cumulative reports during the first three or five calendar years, starting with the model year (age 0). Only fully elapsed windows are compared.
2018: 0 complaints
Equal observation windows
Model year
Through age 0
Through age 1
Through age 2
2018
0
0
0
Date coverage across each selected cohort
Date basis for all complaints in selected model years
Year
Incident dates used
Filing date fallbacks
Excluded dates
2018
2
0
0
Incident date is preferred when valid and no later than filing; otherwise filing date is used. Model year approximates age. Equal observation time does not adjust for sales, distance driven or reporting delays. One complaint linked to multiple model years can appear in each cohort.
Components reported together
Each cell counts unique complaints naming both components. Open a nonzero cell for examples.
Component co-occurrence matrix
Component
Engine
Power Train
Engine
—
0
Power Train
0
—
Co-reporting does not establish that one component caused another concern.
Recurring narrative patterns
Specific keyword mentions beyond broad component labels. Matching includes negations and comparisons and does not confirm a diagnosis.
2 patterns with matching reports.
Stalling or loss of power
1 mentions · 50.0% of complaints
Median mileage: Unavailable (0 usable records).
ODI 11760041
Component/System: The intake camshaft positioner/adjuster on cylinder bank 2 of the M276 V6 engine has failed, along with associated timing components. The vehicle (2018 Mercedes-Benz E400, VIN [XXX]) remains unrepaired and is available for inspection upon request. Safety Risk: The engine produces a loud metallic rattle on cold starts, indicating loss of proper camshaft timing control. If unaddressed, camshaft timing deviation can progress to timing chain failure, which on interference engines can cause valve-to-piston contact and sudden, seve…
Matching rule\b(stall\w*|loss of power|lost power|engine shut\w* off)\b
Warning lights and dashboard alerts
1 mentions · 50.0% of complaints
Median mileage: Unavailable (0 usable records).
ODI 11760041
Component/System: The intake camshaft positioner/adjuster on cylinder bank 2 of the M276 V6 engine has failed, along with associated timing components. The vehicle (2018 Mercedes-Benz E400, VIN [XXX]) remains unrepaired and is available for inspection upon request. Safety Risk: The engine produces a loud metallic rattle on cold starts, indicating loss of proper camshaft timing control. If unaddressed, camshaft timing deviation can progress to timing chain failure, which on interference engines can cause valve-to-piston contact and sudden, seve…