U.S. public vehicle records

2006 Monaco Coach SIGNATURE problems and owner complaints

Explore the records behind recurring owner reports.

Key facts

1 owner complaints analyzed

4 distinct recall campaigns

2,500 mi median reported failure mileage

Scope: 2006 model year. Data updated: 2026-10-01 (October 1, 2026). 1 complaints include usable failure mileage. View data status.

This selection has limited data. It remains available for lookup but is excluded from search indexing.

Owner-reported patterns

Most common problems

Electrical System: Instrument Cluster/Panel is the most frequently named component, appearing in 1 of 1 complaints (100.0%). A complaint can name multiple components.

Recurring terms in complaint narratives
Topic	Matching reports	Share of complaints
Braking behavior	1	100.0%

Topic matches use published keyword rules. They describe mentions, including negations or comparisons, and do not confirm a diagnosis. Read the matching rules.

Component breakdown

Number of unique complaints naming each component. Top eight shown.

Electrical System: Instrument Cluster/Panel

Electrical System:Horn

Electrical System:Wiring:Fuses And Circuit Breakers

Exterior Lighting:Brake Lights

Exterior Lighting:Headlights

Fuel System, Diesel:Storage:Tank Assembly

Fuel System, Other:Storage:Fuel Gauge System

Latches/Locks/Linkages

Component breakdown data
Category	Count
Electrical System: Instrument Cluster/Panel	1
Electrical System:Horn	1
Electrical System:Wiring:Fuses And Circuit Breakers	1
Exterior Lighting:Brake Lights	1
Exterior Lighting:Headlights	1
Fuel System, Diesel:Storage:Tank Assembly	1
Fuel System, Other:Storage:Fuel Gauge System	1
Latches/Locks/Linkages	1

Electrical System: Instrument Cluster/Panel: 1; Electrical System:Horn: 1; Electrical System:Wiring:Fuses And Circuit Breakers: 1; Exterior Lighting:Brake Lights: 1; Exterior Lighting:Headlights: 1; Fuel System, Diesel:Storage:Tank Assembly: 1; Fuel System, Other:Storage:Fuel Gauge System: 1; Latches/Locks/Linkages: 1

Reported problems by failure mileage

Complaint counts in mileage bands. These are not failure rates per vehicle or mile.

Under 25,000

25,000 to 49,999

50,000 to 74,999

75,000 to 99,999

100,000 to 149,999

150,000 and above

Under 25,000: 1; 25,000 to 49,999: 0; 50,000 to 74,999: 0; 75,000 to 99,999: 0; 100,000 to 149,999: 0; 150,000 and above: 0

Under 25,000 miles has the most reports with usable mileage (1). 0 complaints have missing, zero or invalid mileage.

Complaints over time

Year the complaint was filed, not the vehicle model year or incident year. The snapshot year is partial.

2006

2006: 1

Pattern summary

Electrical System: Instrument Cluster/Panel leads the component reports. Braking behavior appears in 1 complaint narratives. Use these patterns to inspect individual reports and prepare questions for a mechanic.

Calculated from recorded counts. An AI narrative has not been published for this selection.

Complaint evidence

Examples provide context, not a representative sample or a verified diagnosis.

Owner report 10177306 · 2006-12-29 (December 29, 2006)

MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO…

Owner-reported narrative. 2,500 miles reported. Look up ODI 10177306 at NHTSA ↗

Explore the data

Vehicle analysis explorer

Inspect model-year patterns, reported mileage, monthly activity and the evidence behind each signal.

Data completeness

1 unique complaints in this selection. Analysis snapshot: 2026-10-01.

100.0%Usable mileage1 / 1 records

100.0%Valid incident date1 / 1 records

100.0%Valid filing date1 / 1 records

100.0%Ordered incident and filing dates1 / 1 records

Missing, zero and invalid mileage is excluded. Dates after the snapshot are excluded. Examples are limited selections, not a representative sample.

Problems by model year

Model-wide comparison of the eight most reported components across the model. Cells show counts and shares within each model year. Open a cell for source examples.

From model yearThrough model year

Component complaint heatmap
Component	1997	1998	1999	2000	2001	2002	2003	2004	2005	2006	2007	2008	2009	2010	2011
Electrical System	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	125.0% ODI 10161318 · 53,851 mi WHILE TRAVELING EAST ON I 40, 70 MILES EAST OF BARSTOW CA MY ALTERNATOR MALFUNCTIONED CAUSING THE ISOLATOR BAR TO MELT CAUSING THE ALTERNATOR TO SEND 25 VOLTS THROUGH THE COACH BURNING UP THE COACH BATTERIES AND STARTING A FIRE IN THE CABINET ABOVE THE DRIVERS HEAD. I WAS ABLE TO PULL OFF THE FREEWAY SAFELY AND EXTINGUISH THE FIRE WITH THE FIRE EXTINGUISHER, ALSO SEVERAL SWITCHES BURNED UP. AT THIS TIME THE INVERTOR, SOLENOID, NUMEROUS FUSES, AND THE ELECTRONIC BOARDS IN THE AC BURNED OUT. I GOT THE VEHICLE PARKED SAFELY AND HAD THE VEHICLE… Look up ODI 10161318 at NHTSA ↗	00.0% No examples available for this selection.	2100.0% ODI 10243847 THE MOTORHOME LIGHTS ARE NOT RELAY ISOLATED FROM THE TOW PACKAGE. TURNING THE MOTORHOME LIGHTS ON, WHILE TOWING A TRAILER, CAUSED AN OVERLOAD OF THE SUPPLY CIRCUIT AND CAUSED A FIRE IN THE FORWARD RUN BAY. *TR Look up ODI 10243847 at NHTSA ↗	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.
Suspension	150.0% ODI 10206001 · 91,050 mi RV COACH TAG AXLE SHEARED OFF HIS WELDMENT AND SEPARATED DURING PARKING MANEUVER, WHICH DISCONNECTED THE WHEELS FROM COACH AND MADE IT INOPERABLE, IF SEPARATED AT HIGHWAY SPEED THE COACH WOULD HAVE CRASHED AND BODILY HARM OR DEATH COULD HAVE OCCURRED. PARTS STILL HANGING OF COACH. *TR Look up ODI 10206001 at NHTSA ↗	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	125.0% ODI 11114606 · 106,000 mi TL* THE CONTACT OWNS A 2000 MONACO COACH SIGNATURE. WHILE DRIVING 45 MPH, THE TAG AXLE FRACTURED WITHOUT WARNING. THE VEHICLE WAS TOWED TO AN INDEPENDENT MECHANIC FOR DIAGNOSTIC TESTING AND REPAIRS. THE LOCAL DEALER AND MANUFACTURER WERE NOT NOTIFIED. THE FAILURE MILEAGE WAS 106,000. *TR TR Look up ODI 11114606 at NHTSA ↗	150.0% ODI 11102388 · 160,000 mi TL* THE CONTACT OWNS A 2001 MONACO COACH SIGNATURE. THE CONTACT HEARD ABNORMAL NOISES COMING FROM THE VEHICLE. UPON INSPECTION, THE CONTACT NOTICED THAT THE TAG AXLE HAD FRACTURED IN THREE SPOTS. THE CONTACT WAS INFORMED OF NHTSA CAMPAIGN NUMBER: 01V328000 (SUSPENSION); HOWEVER, THE MANUFACTURER REFUSED TO ADDRESS ANY RECALL REPAIRS PRIOR TO 2015 WHEN THEY PURCHASED MONACO. THE DEALER WAS NOT CONTACTED. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE FAILURE MILEAGE WAS APPROXIMATELY 160,… Look up ODI 11102388 at NHTSA ↗	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.
Exterior Lighting	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	150.0% ODI 10668999 · 55,000 mi WHILE DRIVING AT NIGHT I SUDDENLY LOST MY HEADLIGHTS. UPON CLOSER EXAMINATION THE 20 AMP HEADLIGHT CIRCUIT IS FED DIRECTLY INTO AN SM209 CONTROLLER THROUGH LIGHT GAUGE WIRING (20 AMPS REQUIRES THE USE OF 12 GA.) VIA A FLIMSY LIGHT DUTY ELECTRICAL CONNECTOR AT POSITION J12. THIS CONNECTION FRIED AT THE CONNECTOR DAMAGING THE CONTROLLER AND DIRECTLY CAUSING THE HEADLIGHTS TO FAIL. AFTER REVIEWING SEVERAL BLOGS I SEE THIS IS A VERY COMMON PROBLEM. HAVING DRIVEN DOWN SEVERAL PITCH-BLACK STRETCHES OF HIGHWAY AT HIGHWAY SPEEDS I COULD HAVE FL… Look up ODI 10668999 at NHTSA ↗	150.0% ODI 10253490 2002 MONACO SIGNATURE CAUGHT FIRE. CONSUMER BELIEVES THAT FIRE WAS CAUSED BY A FAULTY DESIGN OF THE EXTERNAL LIGHTING CIRCUITRY. CONSUMER WOULD LIKE THIS MATTER INVESTIGATED. KB THE CONSUMER STATED ALL OF THE CURRENT NEEDED TO POWER THE EXTERNAL LIGHTS RAN THROUGH A SMART WHEEL CONTROLLER LOCATED IN THE FORWARD RUN-BAY. THE CONTROLLER WAS DESIGNED TO HANDLE THE CURRENT LOAD OF THE EXTERNAL LIGHTS ON THE MOTORHOME BUT NOT ADDITIONAL LOAD OF A TOW VEHICLE. JB Look up ODI 10253490 at NHTSA ↗	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.
Electrical System: Instrument Cluster/Panel	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	1100.0% ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.
Electrical System:Horn	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	1100.0% ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.
Electrical System:Wiring:Fuses And Circuit Breakers	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	1100.0% ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.
Equipment	150.0% ODI 10224826 · 1 mi MOTORHOME/RV HAS A DIESEL FIRED COOLANT HEATER. THE UNIT IS IN A STORAGE SPACE OF THE COACH. THE UNIT LEAKS FUEL INTO THIS INTERIOR SPACE. THIS FUEL LEAKAGE IS A FIRE HAZARD. THE MANUFACTURE CLAIMS OWNERS WERE NOTIFIED OF THE PROBLEM (NHTSA 02X003000). I WAS NEVER NOTIFIED. THE OEM REFUSES TO PROVIDE A REPLACEMENT PART. *TR Look up ODI 10224826 at NHTSA ↗	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.
Equipment:Recreational Vehicle/Trailer	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	1100.0% ODI 10067506 INTERMITTENTLY THE SAMSUN MODEL MW6351R SERIAL#72QCD00505 MICROWAVE WAS ON AND RUNNING BY ITSELF. CONSUMER HAD TO DISCONNECT THE MICROWAVE. *AK Look up ODI 10067506 at NHTSA ↗	00.0% No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	00.0% No examples available for this selection.	00.0% No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.	0Unavailable No examples available for this selection.

Darker cells indicate a larger share of submitted complaints. Components overlap. This measures complaint composition, not failure probability.

Failure mileage by component

Median and middle 50% of usable owner-reported mileages. Ranges require at least five records.

Component failure mileage distribution
Component	Mileage range (25th–75th percentile)	Median	Usable records	Examples
Electrical System: Instrument Cluster/Panel	Too few reports for a range	2,500 mi	1 (sparse)	ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Electrical System:Horn	Too few reports for a range	2,500 mi	1 (sparse)	ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Electrical System:Wiring:Fuses And Circuit Breakers	Too few reports for a range	2,500 mi	1 (sparse)	ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Exterior Lighting:Brake Lights	Too few reports for a range	2,500 mi	1 (sparse)	ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Exterior Lighting:Headlights	Too few reports for a range	2,500 mi	1 (sparse)	ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Fuel System, Diesel:Storage:Tank Assembly	Too few reports for a range	2,500 mi	1 (sparse)	ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Fuel System, Other:Storage:Fuel Gauge System	Too few reports for a range	2,500 mi	1 (sparse)	ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Latches/Locks/Linkages	Too few reports for a range	2,500 mi	1 (sparse)	ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗

Complaint and recall timeline

Explore monthly filing activity alongside recall announcements. Up to ten years of monthly history is available.

ComponentPeriod

Solid line: filed complaints. Dashed amber lines: recall announcement dates for this vehicle selection; markers include all recall components. The latest month is partial. Temporal proximity does not establish causation.

Monthly counts, recall campaigns and complaint examples

Monthly complaint and recall timeline
Month	Campaigns announced	Examples
2024-11	None	No examples available for this selection.
2024-12	None	No examples available for this selection.
2025-01	None	No examples available for this selection.
2025-02	None	No examples available for this selection.
2025-03	None	No examples available for this selection.
2025-04	None	No examples available for this selection.
2025-05	None	No examples available for this selection.
2025-06	None	No examples available for this selection.
2025-07	None	No examples available for this selection.
2025-08	None	No examples available for this selection.
2025-09	None	No examples available for this selection.
2025-10	None	No examples available for this selection.
2025-11	None	No examples available for this selection.
2025-12	None	No examples available for this selection.
2026-01	None	No examples available for this selection.
2026-02	None	No examples available for this selection.
2026-03	None	No examples available for this selection.
2026-04	None	No examples available for this selection.
2026-05	None	No examples available for this selection.
2026-06	None	No examples available for this selection.
2026-07	None	No examples available for this selection.
2026-08	None	No examples available for this selection.
2026-09	None	No examples available for this selection.
2026-10 (partial)	None	No examples available for this selection.

Emerging complaint spikes

Complete months in the latest six months with at least 10 complaints, at least twice the preceding 12-month average, and at least three square-root deviations above that average.

This is a descriptive screening rule, not a statistical defect finding. Publicity and reporting changes can increase submissions.

No complete months meet the spike thresholds for this selection.

Equal-age model-year comparison

Model-wide cumulative reports during the first three or five calendar years, starting with the model year (age 0). Only fully elapsed windows are compared.

Observation windowFirst model yearSecond model year

2010: 0 complaints · 2011: 0 complaints

Equal observation windows
Model year	Through age 0	Through age 1	Through age 2
2010	0	0	0
2011	0	0	0

Date coverage across each selected cohort

Date basis for all complaints in selected model years
Year	Incident dates used	Filing date fallbacks	Excluded dates
2010	0	0	0
2011	0	0	0

Incident date is preferred when valid and no later than filing; otherwise filing date is used. Model year approximates age. Equal observation time does not adjust for sales, distance driven or reporting delays. One complaint linked to multiple model years can appear in each cohort.

Components reported together

Each cell counts unique complaints naming both components. Open a nonzero cell for examples.

Component co-occurrence matrix
Component	Electrical System: Instrument Cluster/Panel	Electrical System:Horn	Electrical System:Wiring:Fuses And Circuit Breakers	Exterior Lighting:Brake Lights	Exterior Lighting:Headlights	Fuel System, Diesel:Storage:Tank Assembly	Fuel System, Other:Storage:Fuel Gauge System	Latches/Locks/Linkages
Electrical System: Instrument Cluster/Panel	—	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Electrical System:Horn	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	—	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Electrical System:Wiring:Fuses And Circuit Breakers	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	—	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Exterior Lighting:Brake Lights	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	—	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Exterior Lighting:Headlights	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	—	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Fuel System, Diesel:Storage:Tank Assembly	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	—	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Fuel System, Other:Storage:Fuel Gauge System	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	—	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗
Latches/Locks/Linkages	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	1 ODI 10177306 · 2,500 mi MOTOR COACH REAR AXLES (2) WELDED INCORRECT, -0.48 THRUST ANGLE & 0.30 SCRUB ANGLE ON AXLE #1. TOE @ -0.34 DEGREES & 0.44 DEGREES FROM FACTORY/DEALER. FRONT AXLE ALIGNMENT "OVERADJUSTED" TO OVERCOME EXTREME REAR AXLE OFFSET. (ALIGNMENT SHOP STATES FACTORY WELDING "JIG" IS OFF AND MUST BE OTHER COACHS WITH SAME UNSAFE HANDELING PROBLEMS!!) WINDSHIELD WIPERS DID NOT WORK. WINDSHIELD WIPER ARM BENT & WON'T MAKE CONTACT WITH GLASS. WINDSHIELD WASHER NOZZLES EMIT INTERMITTENT STREAMS...NO COVERAGE. DRIVER SHOULDER BELT BINDS INSIDE REAR CUSHIO… Look up ODI 10177306 at NHTSA ↗	—

Co-reporting does not establish that one component caused another concern.

Recurring narrative patterns

Specific keyword mentions beyond broad component labels. Matching includes negations and comparisons and does not confirm a diagnosis.

Search patterns

1 patterns with matching reports.

Brake response concerns

1 mentions · 100.0% of complaints

Median mileage: 2,500 mi (1 usable records).

ODI 10177306 · 2,500 mi

Look up ODI 10177306 at NHTSA ↗

Matching rule