Rolls-Royce SILVER SHADOW recalls by model year

Reported: 1971-11-19 (November 19, 1971) · Model years: 1968, 1969, 1970

Reported: 1972-04-18 (April 18, 1972) · Model years: 1971

Reported: 1973-11-23 (November 23, 1973) · Model years: 1973

Reported: 1974-02-05 (February 5, 1974) · Model years: 1973

Reported: 1980-05-30 (May 30, 1980) · Model years: 1975, 1976, 1977, 1978, 1979, 1980

HEAT GENERATED BY CATALYTIC CONVERTERS MAY CAUSE DETERIORATION OF HYDRAULIC BRAKE HOSES ON CERTAIN VEHICLES. BRAKE HOSE MAY FAIL, RESULTING IN LOSS OF HYDRAULIC FLUID FROM THE DUAL HYDRAULIC SYSTEM.

Remedy: DEALER WILL REPLACE HYDRAULIC BRAKE HOSES AND INSTALL A HEAT SHIELD TO PROTECT THEM, WITHOUT CHARGE.

Reported: 1977-01-06 (January 6, 1977) · Model years: 1976

ON THE INVOLVED VEHICLES, THE SECURING NUT WHICH FASTENS THE PENDULUM LEVER TO THE STEERING BOX ROCKING SHAFT MAY NOT HAVE BEEN TIGHTLY FASTENED. SHOULD THE NUT WORK LOOSE AND COME OFF, THE PENDULUM LEVER MAY BE DETACHED FROM THE ROCKING SHAFT.

Remedy: THE DEALER WILL TIGHTEN THE SECURING NUT TO PROPER SPECIFICATIONS ON ALL INVOLVED VEHICLES.

Reported: 1977-06-14 (June 14, 1977) · Model years: 1977

DURING VEHICLE ASSEMBLY THE FOLLOWING MAY NOT HAVE BEEN SUFFICIENTLY TIGHTENED: THE FOUR SETSCREWS SECURING THE STEERING RACK MOUNTING FRAME TO THE SUB-FRAME; FOUR NUTS AND BOLTS SECURING ENGINE FRONT MOUNT CROSS-MEMBERS TO THE SUB-FRAME; TWO SETSCREWS SECURING THE INNER BALL JOINT BRACKET TO THE STEERING RACK; AND THREE COUNTERSUNK SETSCREWS SECURING THE STEERING WHEEL TO ITS HUB.

Remedy: THE DEALER WILL TIGHTEN BOLTS AND SCREWS TO THE PROPER SPECIFICATIONS, AT NO COST TO OWNER.

Reported: 1977-10-25 (October 25, 1977) · Model years: 1977

ON THE INVOLVED VEHICLES, ANY OF THE FOUR BOLTS MAY BECOME LOOSE OR DETACHED FROM THE TRACK ROD ADJUSTER.

Remedy: DEALER WILL TIGHTEN THE TRACK ADJUSTING CLAMP BOLTS, IF NECESSARY, WITHOUT CHARGE.

Reported: 1978-01-10 (January 10, 1978) · Model years: 1977, 1978

THE VEHICLE MAY REMAIN ON AUTOMATIC CRUISE CONTROL EVEN WHEN DRIVER ATTEMPTS TO BRAKE. THIS MALFUNCTION MAY OCCUR WITHOUT PRIOR WARNING.

Remedy: AS A TEMPORARY SOLUTION, DEALER WILL REMOVE THE SLEEVE BALL CHAIN LINKING THE BELLOWS VACUUM ASSEMBLY TO THE ACCELERATOR THROTTLE LINKAGE.

Reported: 1979-02-27 (February 27, 1979) · Model years: 1979

THE REAR SEAT BELT STALK COULD BECOME DETACHED WHEN IN USE DUE TO IMPROPER HEAT PROCESSING DURING MANUFACTURE.

Remedy: DEFECTIVE REAR SEAT BELTS WILL BE REPLACED WITHOUT CHARGE TO OWNER.