Utility Trailer VS2DX recalls by model year

Reported: 2021-04-07 (April 7, 2021) · Model years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

Utility Trailer Manufacturing Company (Utility Trailer) is recalling certain 2006-2021 VS2DC, VS2DX, VS3DX trailers. The horizontal weld that attaches a mild steel angle to the slider rail for super doubles/pintle hook operations may be missing.

Consequence: Without the weld, the slider rail may detach from the trailer, increasing the risk of a crash.

Remedy: Utility Trailer will notify owners, and dealers will inspect and, if necessary, add the weld, free of charge. Owner notification letters were mailed on April 9, 2021. Owners may contact Utility Trailer customer service at 1-800-423-6591. Utility Trailer's number for this recall is SB-07-015.

Reported: 2011-02-18 (February 18, 2011) · Model years: 2008

UTILITY TRAILER IS RECALLING CERTAIN MODEL YEAR 2007-2009 VS2RA AND MODEL YEAR 2008 VS2DX REFRIGERATED AND DRY VANS EQUIPPED WITH ARVINMERITOR AXLES. INSUFFICIENT TORQUE MAY HAVE BEEN APPLIED ON THE SPINDLE NUT ON THE ARVINMERITOR TL SERIES TRAILER AXLES INSTALLED IN THESE VAN TRAILERS WHERE THE STAKE WASHER FOR THE NUT IS STAKED IN A SINGLE LOCATION AS OPPOSED TO MULTIPLE LOCATIONS.

Consequence: LOW AND/OR NO TORQUE ON THE NUT CAN RESULT IN EXCESSIVE END-PLAY IN THE WHEEL-END SYSTEM AND COULD PROGRESS TO A WHEEL SEPARATION WHICH COULD RESULT IN A CRASH.

Remedy: ARVINMERITOR IS WORKING WITH THE VEHICLE MANUFACTURERS TO IDENTIFY AND REPAIR THE VEHICLES THAT CONTAIN THE SUBJECT AXLES FREE OF CHARGE. PLEASE SEE ARVINMERITOR DEFECT REPORT 10E-058. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING MARCH 2011. OWNERS MAY CONTACT ARVIN MERITOR AT 1-248-273-4641.

Reported: 2012-01-20 (January 20, 2012) · Model years: 2011, 2012

UTILITY MANUFACTURING COMPANY (UTILITY) IS RECALLING CERTAIN MODEL YEAR 2011-2012 UTILITY VS1DC AND VS2DX DRY VANS MANUFACTURED FROM DECEMBER 2010 THROUGH AUGUST 2011, AND EQUIPPED WITH AN OPTIONAL LIFTGATE BATTERY BOX. THE MOUNTING PLATES USED FOR MOUNTING SINGLE OR DOUBLE BATTERY BOXES ON TRAILERS MAY BE THE INCORRECT SIZE AND SOME MAY ALSO HAVE BEEN MISORIENTED DURING INSTALLATION.

Consequence: BATTERY BOXES MOUNTED WITH THE INCORRECT SIZE OR IMPROPERLY ORIENTED MOUNTING PLATES CAN BECOME DETACHED FROM THE TRAILER, INCREASING THE RISK OF A CRASH.

Remedy: UTILITY WILL NOTIFY OWNERS AND DEALERS WILL INSPECT THE MOUNTING PLATES AND REPLACE THEM AS NECESSARY, FREE OF CHARGE. OWNER NOTIFICATION HAS ALREADY BEGUN. OWNERS MAY CONTACT UTILITY TRAILER MANUFACTURING COMPANY AT 1-626-854-7215.

Reported: 2014-07-30 (July 30, 2014) · Model years: 2014

Utility Trailer Manufacturing Company (Utility) is recalling certain model year 2012-2014 VS1RA, and 2013-2014 VS1DC, VS2DX, VS2RA, VS3DX, and VS3RA trailers manufactured April 2011, to May 2013. The pintle hook tube sub assembly that is welded to the pintle hook safety chain loop may break and fall off the vehicle.

Consequence: If the loop were to break off, the air lines and electrical lines would detach, applying the towed trailer's brakes, increasing the risk of a vehicle crash.

Remedy: Utility will notify owners, and dealers will inspect and replace the pintle hook safety chain loop if it is cracked, free of charge. The recall is expected to begin in September 2014. Owners may contact Utility customer service at 1-800-423-6591. Utility's number for this recall is SB 07-011/370258.

Reported: 2015-02-04 (February 4, 2015) · Model years: 2014, 2015

Utility Trailer Manufacturing Company (Utility) is recalling certain model year 2014-2015 FS2CHA, VS2DX, VS1DC, VS2RA, and VS1RA trailers manufactured April 14, 2014, to November 4, 2015, equipped with certain Haldex Life Seal Type 30/30 Long Stroke Air Brake Actuators manufactured January 9, 2014, to October 28, 2014. The affected actuators may have an incomplete attachment of the internal rubber diaphragm to the actuation mechanism of the parking brake section of the Life Seal actuator.

Consequence: If the diaphragm is not completely attached, there may be internal leakage from the service section past the diaphragm, potentially trapping air pressure in the parking brake section. This air pressure in turn, if not vented, may prevent full release of the actuator unit, and may induce brake drag and may result in overheated wheelend service brakes, increasing the risk of a fire.

Remedy: Utility will notify owners and dealers will replace the actuators, free of charge. The recall began on April 9, 2015. Owners may contact Utility customer service at 1-800-423-6591. Utility's number for this recall is 14E075.